Serial interfaces cables and converters scheme  > Cisco pinouts
Cisco Part#: CAB-530MT=

60 Pin1

Signal

25 Pin

Signal
Direction
DTE DCE2
J1-11
J1-12
TxD/RxD+
TxD/RxD-
J2-2
J2-14
BA(A), TxD+
BA(B), TxD-
-
-
J1-28
J1-27
RxD/TxD+
RxD/TxD-
J2-3
J2-16
BB(A), RxD+
BB(B), RxD-
-
-
J1-9
J1-10
RTS/CTS+
RTS/CTS-
J2-4
J2-19
CA(A), RTS+
CA(B), RTS-
-
-
J1-1
J1-2
CTS/RTS+
CTS/RTS-
J2-5
J2-13
CB(A), CTS+
CB(B), CTS-
-
-
J1-3
J1-4
DSR/DTR+
DSR/DTR-
J2-6
J2-22
CC(A), DSR+
CC(B), DSR-
-
-
J1-46
J1-47
Shield_GND
MODE_2
J2-1
-
Shield
-
Shorted
J1-48
J1-49
GND
MODE_1
-
-
-
-
Shorted
J1-5
J1-6
DCD/DCD+
DCD/DCD-
J2-8
J2-10
CF(A), DCD+
CF(B), DCD-
-
-
J1-24
J1-23
TxC/RxC+
TxC/RxC-
J2-15
J2-12
DB(A), TxC+
DB(B), TxC-
-
-
J1-26
J1-25
RxC/TxCE+
RxC/TxCE-
J2-17
J2-9
DD(A), RxC+
DD(B), RxC-
-
-
J1-44
J1-45
LL/DCD
Circuit_GND
J2-18
J2-7
LL
Circuit_ GND
-
-
J1-7
J1-8
DTR/DSR+
DTR/DSR-
J2-20
J2-23
CD(A), DTR+
CD(B), DTR-
-
-
J1-13
J1-14
TxCE/TxC+
TxCE/TxC-
J2-24
J2-11
DA(A), TxCE+
DA(B), TxCE-
-
-

Arrows indicate signal direction: - indicates DTE to DCE, and - indicates DCE to DTE.

1 Any pin not referenced is not connected.
2 The EIA-530 interface cannot be operated in DCE mode. A DCE cable is not available for the EIA-530 interface.

60 pin Cisco DB connector layout
60 pin Cisco DB connector
25 pin Cisco DB connector layout
25 pin Cisco DB connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Cisco EIA/TIA-530 DTE cable (DB60 to DB25) cable visual pinout:
Cisco EIA/TIA-530 DTE cable (DB60 to DB25) cable diagram
click to enlarge
Source(s) of this and additional information: Cisco Systems, Inc.
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.