Pinouts >  Computer buses and slots connectors
146 pin PC/104 16 bit connector layout
146 pin PC/104 16 bit connector
PC/104 is a compact version of the ISA bus. PC/104 is intended for specialized embedded computing environments where applications depend on reliable data acquisition despite an often extreme environment.
  • Reduced form-factor to 90 by 96 mm.
  • Eliminated the need for backplanes or card cages, through its self-stacking bus
  • Minimized component count and power consumption (to typically 1-2 Watts per module), by reducing required bus drive on most signals to 4 mA.

PC/104 modules can be of two bus types, 8-bit and 16-bit. These correspond to the PC and PC/AT buses, respectively.

Pin J1/P1 J1/P1 J2/P2 (16-bit modules only) J2/P2 (16-bit modules only)
Number Row A Row B Row C1 Row D1
0----0V0V
1IOCHCHK*0VSBHE*MEMCS16*
2SD7RESETDRVLA23IOCS16*
3SD6+5VLA22IRQ10
4SD5IRQ9LA21IRQ11
5SD4-5VLA20IRQ12
6SD3DRQ2LA19IRQ15
7SD2-12VLA18IRQ14
8SD1ENDXFR*LA17DACK0*
9SD0+12VMEMR*DRQ0
10IOCHRDY(KEY)2MEMW*DACK5*
11AENSMEMW*SD8DRQ5
12SA19SMEMR*SD9DACK6*
13SA18IOW*SD10DRQ6
14SA17IOR*SD11DACK7*
15SA16DACK3*SD12DRQ7
16SA15DRQ3SD13+5V
17SA14DACK1*SD14MASTER*
18SA13DRQ1SD150V
19SA12REFRESH*(KEY)2 0V
20SA11SYSCLK----
21SA10IRQ7----
22SA9IRQ6----
23SA8IRQ5----
24SA7IRQ4----
25SA6IRQ3----
26SA5DACK2*----
27SA4TC----
28SA3BALE----
29SA2+5V----
30SA1OSC----
31SA00V----
320V0V----

Rows C and D are not required on 8-bit modules. B10 and C19 are key locations.
Signal timing and function are as specified in ISA specification. Signal source/sink current differ from ISA values.

According to 3 reports in our database (2 positive and 1 negative) the PC/104 bus pinout should be correct.

Is this pinout
PC/104 bus visual pinout:click to enlarge
Source(s) of this and additional information: PC/104 v2.3 spec, PC/104 pinout, PC/104 Consortium, from Hardware Book
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings