VGA, DVI, S-Video and other video connectors pinouts

The DFP connector is a 20 pin connector. It and the DVI connector carry the same type of digital signal (TMDS). The DFP connector was created before the DVI, by VESA, and is only designed to carry digital video, so there is no provision to carry analog.

Pin Signal
1 TMDS Data 1 +
2 TMDS Data 1 ?
3 Ground
4 Ground
5 TMDS Data C +
6 TMDS Data C ?
7 Ground
8 +5V
9 Reserved
10 Reserved
11 TMDS Data 2 +
12 TMDS Data 2 -
13 Ground
14 Ground
15 TMDS Data 0 +
16 TMDS Data 0 -
17 Reserved
18 Reserved
19 DDC Data
20 DDC Clock


 

20 pin MDR20 female connector layout
20 pin MDR20 female connector
at the videocard
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
DFP-compliant MDR-20 visual pinout:
DFP-compliant MDR-20 diagram
click to enlarge
Source(s) of this and additional information: Matrox G200 Flat Panel Add-On - User Guide
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.