Hardware pinouts information and cables schemes

VESA-compliant P&D - EVC pinout

video connector

bookmark this page

The EVC connector is a combination analog and digital connector designed to carry VGA/RGB, FireWire, audio, and USB signals. The EVC connector is essentially the same as the DVI connector, except it carries different signals. It was designed to simplify computer-monitor connections and to carry video signals with a greater bandwidth that is possible with a VGA connector.

Pin Signal
1 TMDS Data 2 +
2 TMDS Data 2 ?
3 Ground
4 Ground
5 Hsync
6 Vsync
7 Ground
8 CP+
9 1394 Pair Data 1 A ?
10 1394 Pair Data 1 A +
11 TMDS Data 1 +
12 TMDS Data 1 ?
13 Ground
14 TMDS Clock +
15 TMDS Clock ?
16 USB Data +
17 USB Data ?
18 Ground / 1394 SHIELD / CHARGING POWER INPUT-
19 1394 VG
20 1394 VP
21 TMDS Data 0 +
22 TMDS Data 0 ?
23 Ground
24 Stereo Sync
25 Ground
26 DDC Data
27 DDC Clock
28 +5VDC
29 1394 Pair Data 1 B ?
30 1394 Pair Data 1 B +
C1 RED VIDEO OUT
C2 GRN VIDEO OUT
C3 PX CLOCK OUT
C4 BLU VIDEO OUT
C5 COMMON GND RTN

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Want to add or correct something here? Edit this page!
Pinouts.ru > VGA, DVI, S-Video and other video connectors pinouts listing > Pinout of VESA-compliant P&D - EVC and layout of 35 pin MOLEX "MicroCross" female connector
Is it correct?:
unknown
Source(s) of this and additional information: Matrox G200 Flat Panel Add-On - User Guide
no reports
Last updated 2009-05-17 22:31:56. Edit this page. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2008 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
23305 hits since March 4, 2005