Pinouts >  Распиновки разъемов видеокарт компьютера
Used for RF-modulator usually.
 2  4  6  8 10 12 14 16 18 20 22 24 26 28 30
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 1  3  5  7  9 11 13 15 17 19 21 24 25 27 29
Pin Name Description
1 GND Video Ground
2 GND Video Ground
3 XCLK External Genlock Clock (in)
4 R Red (in to video card)
5 /XCLKEN Enables External Clock on XCLK.
6 BR Buffered Red (out from video card)
7 GND Video Ground
8 G Green (in to video card)
9 GMS0 Genlock mode 0 (from computer, genlock button)
10 BG Buffered Green (out from video card)
11 GMS1 Genlock mode 1 (from computer, genlock button)
12 B Blue (in to video card)
13 /PIXELSW Genlock signal
14 BB Buffered Blue (out from video card)
15 VSYNC Vertical Sync (in to video card)
16 CSYNC Composite Sync (in to video card)
17 HSYNC Horizontal Sync (in to video card)
18 BCSYNC Buffered Composite Sync (out from video card)
19 GND Video Ground
20 AUDR Audio Right Output (from computer to RF modulator)
21 DGND Digital Ground
22 AUDL Audio Left Output (from computer to RF modulator)
23 -12V -12 VDC (can be -5 VDC instead)
24 DGND Digital Ground
25 +12V +12 VDC
26 /CD/TV CD/TV button. (Low=CDTV video on RF, High=Antenna)
27 VCC +5 VDC
28 /CCK 3.58 MHz color clock (C1 clock)
29 GND Video Ground
30 VCC +5 VDC

 

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: Darren Ewaniuk"s CDTV Technical Information, from Hardware Book
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.