Pinouts >  Распиновки модулей и карт памяти
30 pin SIMM connector layout
Разъем 30 pin SIMM
at the computer
SIMM=Single Inline Memory Module
Pin Name Description
1 VCC +5 VDC
2 /CAS Column Address Strobe
3 DQ0 Data 0
4 A0 Address 0
5 A1 Address 1
6 DQ1 Data 1
7 A2 Address 2
8 A3 Address 3
9 GND Ground
10 DQ2 Data 2
11 A4 Address 4
12 A5 Address 5
13 DQ3 Data 3
14 A6 Address 6
15 A7 Address 7
16 DQ4 Data 4
17 A8 Address 8
18 A9 Address 9
19 A10 Address 10
20 DQ5 Data 5
21 /WE Write Enable
22 GND Ground
23 DQ6 Data 6
24 A11 Address 11
25 DQ7 Data 7
26 QP Data Parity Out
27 /RAS Row Address Strobe
28 /CASP CAS Parity
29 DP Data Parity In
30 VCC +5 VDC
Note: SIMM above is a 4MBx9.

QP & DP is N/C on SIMMs without parity.
Pins A9 through A11 are N/C, except as follows.
A9 is used for 1M and bigger,
A10 is used for 4M and bigger
A11 is used for 16M
Статус распиновки: +4 -0
На распиновку SIMM 16Mb (30 pin) есть 5 отзыв(а): 4 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: comp.sys.ibm.pc.hardware.* FAQ Part 4, maintained by Ralph Valentino, from J. Ogren and Helfried Behre, comp.sys.ibm.pc.hardware.* FAQ Part 4, maintained by Ralph Valentino
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings