« previous next »
Pages: [1] |   Go Down

Author Topic: 1.8" hard drive pinouts, pin style and zif style  (Read 13871 times)

Myself

  • Junior Member
  • *
  • Posts: 3
1.8" hard drive pinouts, pin style and zif style
« on: November 21, 2007, 18:38:11 »
It seems that the Toshiba 1.8" drives have a different pinout than the Hitachi 1.8" drives, and there's even a third one using a flat flex cable that fits into a latching ZIF connector. I found one:

http://sdd.toshiba.com/techdocs/MK2006GALTechnicalNotes-RevA0.pdf

Which, except for the power being 3.3v instead of 5v, is the same as a 44-pin laptop pinout. It's a smaller connector and female gender, so it looks like CF but is not the same pinout.

There's some good info here:

http://www.rockbox.org/twiki/bin/view/Main/HardDriveReplacement

Would this be good to include on the site?
Logged
Pages: [1] |   Go Up
« previous next »
 

+ Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name: Email:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image
Type the letters shown in the picture:
6x8=: