Pinouts.ru talks
November 21, 2009, 04:30:55 *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1] |   Go Down
  Reply  |  Print  
Author Topic: Megaworks THX 250D volume/ctrl 9-pin DIN  (Read 1181 times)
matskm
Junior Member
*
Posts: 1


« on: September 29, 2009, 17:37:06 »
Reply with quote

Hi all,
       I have recently aquired a Cambridge Soundworks Megaworks THX 250D subwoofer and satellites. It all seems to be in working order, but there is no volume/control remote. The connector is a 9 pin DIN. Does anyone know how I can find out the pinout for this?

I looked under the 9pin connectors on pinouts.ru and couldn't find it. There was one creative speakers 9-pin DIN, but the pins seemed to be carrying the audio signals. On this piece of kit, the DIN interface switches the amp to standby, controls the volume, and does bass/treble.

Also, I live in the UK, any idea where I can lay my hands on a 9-pin DIN of the correct type? I tried maplin electronics, but they only do up to 8-pin DIN. Is it possible I could use an 8-pin DIN, and ignore the final pin?

cheers

Mat
Logged
Pages: [1] |   Go Up
  Reply  |  Print  
 
Jump to:  

+ Quick Reply
With a Quick-Reply you can use bulletin board code and smileys as you would in a normal post, but much more conveniently.

Powered by SMF 1.1.10 | SMF © 2006-2009, Simple Machines LLC