Author Topic: Pin connectors for FUJITSU TEN 86120 YZA39  (Read 12948 times)

neville02

  • Junior Member
  • *
  • Posts: 3
Pin connectors for FUJITSU TEN 86120 YZA39
« on: March 23, 2010, 03:22:36 »
HI THERE, I WAS WONDERING IF ANY OF YOU GUY HAVE PIN OUT DIAGRAMS OF TOYOTA FUJITSU TEN OEM CAR CD STEREO.  
« Last Edit: March 24, 2010, 18:29:08 by neville02 »

neville02

  • Junior Member
  • *
  • Posts: 3
Re: FUJITSU TEN 86120 YZA39
« Reply #1 on: March 23, 2010, 17:45:22 »
The image below shows 2din fujitsu ten model as discribed in my earlier post.  I have no idea what the 12 and 20 pin connectors are for.  The other 2 are for power/remote and the speaker wiring harnesses.   Would appreciate help in identifying the 12 and 20 pin outs so I can DIY installation of my car audio system upgrade.   I want to know if said pin connectors are for high level output and if there is input aux for this particular OEM.

Thanks in advance to any assistance on this matter.

« Last Edit: March 23, 2010, 17:58:03 by neville02 »

FumaKilla

  • Junior Member
  • *
  • Posts: 2
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #2 on: April 23, 2010, 06:22:54 »
i just faced with the same problem. :)
but then i found this lay out
http://elsegra.com/Car%20pinouts/TOYOTA.htm
and i made the CD switch as audio input worked well only the head unit shows ERR4 because the TX+ And TX- is not connected to a REAL CD changer.

here is the pin lay out i used.
http://elsegra.com/Car%20pinouts/TOYOTA_datoteke/image004.gif

neville02

  • Junior Member
  • *
  • Posts: 3
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #3 on: April 23, 2010, 18:26:14 »
thanks fumakilla....  Was wondering if you just used L- L+ and R- R+ as audio input only.  or did your use other pins as well... except for Tx- Tx +   

FumaKilla

  • Junior Member
  • *
  • Posts: 2
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #4 on: April 29, 2010, 12:39:56 »
sorry for the long reply. mine was an old player with out the expensive AVC-LAN. so all I did was put a 5 volt voltage (logic 1) to the TXT pin (pin between acc and TX+) and it work.  your look like the sophisticated one. so you might get help here. http://www.softservice.com.pl/corolla/avc/


china dog

  • Guest
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #5 on: June 14, 2010, 11:47:45 »
Hey Fumakilla

I'm just trying to do the same thing. How did you get the +5v to the pin, and what did you do with the other wires? In desperation, the only thing I can do now, is to leave the CD player connected but take the line in from other source!

Thanks

DF

bacha

  • Guest
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #6 on: December 29, 2010, 10:39:50 »
Dear all
can you helping me for the pin out diagram of FUGITSU TEN 135000-1460A101(86120-33410

michael worthington

  • Guest
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #7 on: April 29, 2011, 02:29:51 »
Looking for pin outs of 20 pin Connector for Fijitsu Ten 86120-YY130

trung

  • Guest
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #8 on: May 20, 2011, 15:35:20 »
 Pin connectors in/out for FUJITSU TEN 86120-0D530

trung

  • Guest
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #9 on: May 20, 2011, 15:44:53 »
Dear all
I WAS WONDERING IF ANY OF YOU GUY HAVE PIN IN/OUT DIAGRAMS OF TOYOTA FUJITSU TEN OEM CAR CD STEREO for FUJITSU TEN 86120-0D530
Thanks.

Mishell1979

  • Junior Member
  • *
  • Posts: 2
Re: Pin connectors for FUJITSU TEN 86120 YZA39
« Reply #10 on: June 18, 2011, 07:34:21 »
Dear all
I WAS WONDERING IF ANY OF YOU GUY HAVE PIN IN/OUT DIAGRAMS OF TOYOTA FUJITSU TEN OEM CAR CD STEREO for FUJITSU TEN 86120-0D530
Thanks.

CHeck Mosta man4. He may have it.

 

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name: Email:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image
Type the letters shown in the picture:
5x8=: