« previous next »
Pages: [1] |   Go Down

Author Topic: Need HP Power Supply DPS-600B Pinout  (Read 6384 times)

BrianG

  • Junior Member
  • *
  • Posts: 1
Need HP Power Supply DPS-600B Pinout
« on: October 01, 2010, 18:31:36 »
I have a server power supply (part # 321632-001) which is rated 12v 47A. It has blade-type connectors for the main 12v load, but there is a 12 pin connector as well. Three of these pins need to be shorted to turn the supply on, but was curious what the other pins were used for. Some supplies use feedback to self-adjust the output based on load and am hoping some of these pins are used for that purpose.
Logged
Pages: [1] |   Go Up
« previous next »
 

+ Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name: Email:
Verification:
Type the letters shown in the picture
Listen to the letters / Request another image
Type the letters shown in the picture:
5x8=: