Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: dmanusa on Jan 20, 2018, 21:35

Title: Help on Pinout server PSU
Post by: dmanusa on Jan 20, 2018, 21:35
I have a dell server hot swap PSU 1850W F1850-SO that has the same blade layout as the F750-SO .. I'm trying to convert it to a miner PSU and hoping someone can tell me what the connector layout is on the control pins that are needed for 12v power switch. 

https://www.databug.com/750W-PowerEdge-Power-Supply-p/f750e-s0.htm
Title: Re: Help on Pinout server PSU
Post by: Crissirinun on Jan 25, 2018, 06:44
The knowledge gained from this reading. It is very helpful and I will put it to use in everyday life.