Macintosh video output (DB15) to Macintosh monitor (HD15)

Started by Mr Wolf, Dec 14, 2012, 08:37

previous topic - next topic
| Go Down

Mr Wolf

Dec 14, 2012, 08:37 Last Edit: Dec 14, 2012, 12:00 by Mr Wolf
I own an "Apple Macintosh LC 630" computer and an "Apple Multiple Scan 15 Display" (model number: M2978), but I cannot find the cable to connect them to each other.
So, I have to build an exact replica of the original Apple cable.

In other words:
- the ending to be connected to the Macintosh computer must be a 15-pin D-SUB male connector (see http://old.pinouts.ru/Video/maclcvideo_pinout.shtml );




- the ending to be connected to the Apple monitor must be a 15-pin high-density D-SUB male connector.




Here it is described how to connect an Apple monitor to a *standard* VGA ( http://pinouts.ru/VideoCables/vga2macintosh_pinout.shtml ) and a *standard* monitor to a Macintosh computer ( http://pinouts.ru/VideoCables/MacVideoToVGA_pinout.shtml ). What I need is connecting an *Apple* monitor to a *Macintosh* computer.
So, what pin connection scheme should I use?

Thank you in advance.

Mr Wolf

#1
Dec 17, 2012, 06:39 Last Edit: Dec 17, 2012, 06:51 by Mr Wolf
Finally I managed to build a working cable as described in the "Macintosh LC to VGA" section here: http://blackcat.fenestrated.net/~macman/mirrors/Apple%20Technotes%20(As%20of%202002)/hw/hw_08.html



So, my monitor turned out to be nothing more than a "standard" VGA one.

| Go Up