10 pin IDC connector

Started by mpheyse, Oct 28, 2013, 16:58

previous topic - next topic
| Go Down

mpheyse

The Image of "10 pin IDC connector" has the Key on the wrong side, for what is standard for IDC headers.  It should be on the odd numbered side (1-9)

For an example See 3M's  8510-4500PL    Data Sheet
http://www.mouser.com/ds/2/1/ts0413-65491.pdf


All other IDC headers on the site  have it correct or don't show the keying.

mpheyse

Submitted an updated image file

| Go Up