An uninterruptible power supply (uninterruptible power source, UPS) is a device that provides emergency power to a load when the input power source fails. UPS provides instantaneous or near-instantaneous protection from input power interruptions by means of one or more attached batteries and associated electronic circuitry.
While not limited to protecting any particular type of equipment, a UPS is typically used to protect computers, data centers, telecommunication equipment or other electrical equipment.
- Ablerex Troy 600 UPS cable Shutdown Cable with UPSee software. Should work with Troy 800
- APC BackUPS CS/ES smart signalling cable original 940-0128A and analogue of the 940-0128A for APC Back-UPS ES "C" BE350C, BE500C, ES 550
- APC BackUPS dumb cable (on-battery only) APC Part# - 940-0023A
- APC BackUPS ES (old) cable wiring APC part # 940-0119A.
- APC BackUPS Office (old) cable APC Part# 940-0119A
- APC BackUPS Pro cable APC Part# 940-0095B. Should work with APC PowerChute Pro software.
- APC BackUPS Pro PNP cable APC part # 940-0095A
- APC BackUPS XS1000, BX-1000 and some others cable wiring APC part# 940-0128D
- APC Dumb UPS cable (simple) APC Part# 940-0020 (grey cable). Should work with APC PowerChute Plus software.
- APC management card 9630,9631 (940-0299a) APC Part# 940-0299A
- APC rack mount Smart-signalling DB9 cable part #940-1524C. Same usage as 024C but the length is 5meter
- APC RJ12 serial cable RJ12 to DB9. Compatible with Rack PDU (AP78xx, AP79xx, AP86xx, AP88xx, AP89xx) and 2G Rack Automatic Transfer Switches (AP7752, AP7752, AP7730, AP7732, AP7721, AP7723). APC part # 940-0144A
- APC Smart UPS cable Cisco console Adapter pinout Should work with APC UPSs that use the following cables: APC Part# 940-0024C, # 940-0024D or 940-1524(black cable) This is to plug a Cisco console (rollover) cable into.
- APC Smart UPS DB9 cable APC Part# 940-0024C, # 940-0024B, # 940-0024D or 940-1524(black cable). Compatible with most APC UPSs that have a DB9 serial port. Should work with APC PowerChute or Apcupsd(UPS Server for Linux)
- APC Smart-UPS 5G cable scheme isn't yet known. APC part# 940-0625A
- APC UPSes with standard USB cable May be easily obtained in any computer shop. Compatible with Back-UPS LS (USB) BP500UC, BP700UC; Back-UPS Pro USB BP350UC, BP500UC, BP500CLR, BP700UC; Smart-UPS 3.6G(USB) SUA1000, SUA1500, SUA750XL, SUA1000XL; Smart-UPS 4.5G(USB) SMT750, SMT100, SMT1500, SMT2200, SMT3000; Smart-UPS 5G(USB) SMX750, SMX1000, SMX1500 and some others
- APC USB cable schematic APC part# 940-0127B, 940-127C and 940-0127E
- Belkin F6H500 UPS cable UPS to PC shutdown cable
- Invertomatic-Victron (IMV) UPS intelligent (serial communication) cable part# VIC-23/2. Works with PowerFLAG software
- Megatech M2501 and M2603 UPS cables Types I, II Used for connecting Megatech inteligent UPS (type I) or smart UPS (type II) to PC
- Sendon UPS-500 dumb cable Part# M2501. Should work with RUPS for DOS/Windows software
- Tripp-lite OmniPro-450 (675) PowerAlert Cable Part# 73-0724 (BC, Internet Office, OmniSmart UPS). Should work with PowerAlert software.
- Tripp-lite OmniPro-450 (675) WinNT Cable Should work with Windows NT UPS Service
- Tripp-lite SmartPro Cable Part# 73-0743 (SmartPro UPS). Should work with PowerAlert software.
