Hi
I recently acquired a Palm Vx from a local used electronics shop but they do not have the charger
I don't know or have any idea where to begin to design the charger myself, I found this
http://pinouts.ru/PDA/palm_iii_pinout.shtml but am not sure if its enough to get me started and how do I start?
Any help would be very much appreciated.
Tahnks
Here is the pinout diagram: http://www.rigacci.org/wiki/doku.php/doc/appunti/hardware/appunti_palm
Counting from the right, pin 2 is "+" 3.3v, pin 10 is ground.
Hello from Canada!
Hi
Thank you very much I really appreciate this. Thank you
^^