Recent posts

#81
My connector plug in end of my scan tool was pulled off . Does anyone know the correct location of each wire to the pins at the connector? thank you
#82
I recently found an x-530 subwoofer at electronic garbage disposal and i wanted to get it working.Sadly i just fount the sub unit(not the 4 speakers he is usually connected to).So i plugged it in and didnt hear any noise coming from the speaker,so I opened it up and replaced a blown fuse and burned trace,then i though it connets to PC using vga cable so i did that and that gave me signal it works.Speaker started humming and amplifier chips heated up and when i turned to volume knob it was getting louder.So i disconnected a VGA and tried to recreate it but i cant,chips are not turning on and all i can hear is transformer inside.So i was googling and saw this post from this site:http://pinoutguide.com/Home/logitech_x530_front_pinout.shtml and found something useful here but not useful enough.I connected pin 11 and 15 and pin 12 to 8 but nothing.
So I was wondering If anyone knows how to turn on amplifier and speaker and how to feed audio singal to the speaker.Thank you
#83
Hi Folks
Since there are too many topics here and not knew where to look, I started the "USB Type C Pinouts and which to use for charging with 5Vdc at 6amps Charge" for the purpose of finding out which pins are for charging.

I have manu power supplies at 5Vdc that uses the 5 mm barel coax connector at 6 amps. I want to make an adapter between the Verizon Force Z and the PSU that I have.

So .... Disgus away and tell me each way to do this. Also source for Type C 3.2 connectors without or with terminals.

Thank you in advance


Ed - KB8QEU
[/font]
#84
Ищу распиновку на данный бп.
#85
Hello

I whant   
Breakout cable  ARRIS VIP5662W Wireless IPTV Receiver. for Bell, TELIUS or other
DIN 10 pins male to 6 RCA  The pinouts for the 10 pin mini-DIN male proprietary
BREAKAWAY CABLE CONNECTION
Alternative method for video/audio connections. Offers
analog component, composite, and stereo audio outputs.

https://frontier.com/~/media/HelpCenter/Documents/tv/vantage-tv/arris-vip5662w-receiver-user-guide.ashx?la=en
page 10 and 11


Thank you
#86
Hello all,

I have an old HP Vectra VL 6 computer whose Power supply failed.
The power supply connector is very similar to HP vectra VL5 (http://pinouts.ru/Power/hp_vectravl5_power_pinout.shtml) but has a 14th wire (colored grey), placed before pin 1 (as also mentionned by other users in reports section).
Also there is another 4 pin molex connector for 3.3V.

Does anyone knows what is the function of this pin ?
I tried to map a standard ATX power supply instead of the original PSU (based on 12/13 pin version found here) but it does not work.  :-\

Any help would be appreciated !
#87
hi everyone , i need help please.
iam making an RGB ps1 and ps2 cables (to use with NTSC and PAL consoles) , some sites say that pin2 is the right audio channel and some sites say that its the left audio channel. which is the correct information please?
http://pinouts.ru/Game/PlayStationAV_pinout.shtml
and
https://gamesx.com/avpinouts/psxav.htm
https://retrocomputing.stackexchange.com/questions/2538/what-pins-on-the-ps2-av-out-port-are-the-audio-pins
http://pinouts.ru/Game/playstation_vga_cable_pinout.shtml
many thanks
#89
hi guys
i have a hp1400watt felxslot power server
how can i full load this power ?
when connected pin 2 to - power get run but whit 6.67volts
#90
I am trying to convert 26 pin Ribbon cable from Dell Floppy Drive to 9 pin Mother Board. I have a picture of the End connector from Ribbon cable to Mother board but can't find out how to post a picture.Is it ok to send me email and i will email picture to anyone that might help me idenify Picture of end cable!Thanks