Hello everyone, I'm in the process of adding the HFT (Hands Free Telephone) installation to the 2013 Honda CR-V. I can't find the pinout diagram of the 39775-T1G-E000 32-pin bluetooth module anywhere. I have browsed and asked in many forums - unfortunately without success. Has anyone encountered this scheme and is able to help me?
Hi, I'm in the process of upgrading my non android head unit (Xpander 2019 GLX, Philippine market) to the GLS variant android touchscreen (also Philippine market). I know that the 20 pin connector (top left of the image beside the fuse) is standard and I can outright just use my existing non android head unit and plug it in to the android variant.
But I wanted to check what are the other headers/ports/pins for?
I understand chrominance is the colour part of a S-video cable. I've read that it is a combination of (red)Pr and (blue)Pb on component cables. I've also read that just Pr or just Pb is chrominance. Does that mean if you jumper the two together directly it creates the chrominance on a S-Video cable? Is the green or the Y of YPbPr directly the same as the luminance on a S-Video cable? If the above is all or partly true then is it OK to have the grounds on the S-Video cable the same ground on pins 1-2?
My situation is I have a new cable box that doesn't have a pinout for a mini din that does have YPbPr output with RH and LH audio and is marked as "analog". I bought the cable and it does as it should and functions dividing red blue and green. Can someone explain if Y(green) is the same as pin 3 and PbPr the same as pin 4 on a S-Video cable?
i have 2015 hyundai tucson se i had a friend remove my stock stereo and he put in a aftermarket but due to summer and him not using connector crimps the tape had loosen up wen i removed stereo i seen that the wires were cut since we didnt have pinout adapters and were cut to short on both pinout car harness originals so i bout new ones on line and also pinout connectors adapters MY QUESTION IS DO THE ORIGINAL WIRES FROM CAR ORIGINAL PINOUT PLUG wires MATCH THE SAME EXACT KEY WIRES SPOTS AS the after market wires if not can u help me with a color code chart for oem wire harness i have chart for after market harnesses thanks
There's no such connection that I'm aware of VGA 15 pin, you probably mean the Serial COM or rather RS-232, which is totally different. Indeed they look the same but they carry very different data & hence interfacing them is very difficult or useless.
If you share what you are trying to do; we might be able to help you.