Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: yorkshirepudding on Aug 27, 2011, 02:50

Title: Request clarification on HP Proliant ML310 aux power pinout
Post by: yorkshirepudding on Aug 27, 2011, 02:50
Hi

http://pinoutsguide.com/Motherboard/hp_compaq_aux_power_pinout.shtml

Is anybody able to clarify a few queries I have with this please?  How are the pins numbered (i.e. where is pin 1 in relation to the clip) ?  What does it mean when it says "Pin 3 is tied to ground if the connector is present / the PSU is O.K."?

I got a Compaq Proliant ML310 from freecycle, and the PSU was gone.  Didn't fancy paying ?120+ for replacement so using a standard ATX that doesn't have 10 pin plug.

Thanks
yorkie
Title: Re: Request clarification on HP Proliant ML310 aux power pinout
Post by: yorkshirepudding on Sep 09, 2011, 21:57
Decided just to try what I thought it might be and worked.  Linked pin 3 to pin 3 of the ATX connector (a ground).  The 10pin plug I found on ebay had the pins numbered so was ok.