Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: yesyes on Dec 28, 2006, 18:44

Title: Samsung LT141x4-156 inverter board pinout
Post by: yesyes on Dec 28, 2006, 18:44
Hi there,

I have several Samsung LT141x4-156 TFT panels. I bought a converter kit to connect the panel to my PC as a 2nd monitor. I have a picture on the panel but the backlight doesn't work. It comes on with about half the expected brightness for about a second when switching on but then stays off. That is when I use the inverter board that came with the converter kit.

Now I thought I'd try to use the inverter that is on the back of the panel but that has a completely different connector. And it's that connector I'm looking for a pinout for. It's a 15 pin connector that directly takes the flat cable.

Google didn't bring up any results for the pinout (but it brought up this forum... :lol: )

Also, does anyone know whether the connection from the inverter to the lamp has a polarity, i.e. does it matter which way I connect the 2 cables to the inverter?

Thanks for any answers!

yesyes
Title: Samsung LT141x4-156 inverter board pinout
Post by: ahyq mxbljoq on Jan 29, 2007, 07:44
yjgvih hdxfpewq vbcfgq xzcsviwo joxkma tuak yziw
Title: Samsung LT141x4-156 inverter board pinout
Post by: ahyq mxbljoq on Jan 29, 2007, 07:45
yjgvih hdxfpewq vbcfgq xzcsviwo joxkma tuak yziw
Title: Samsung LT141x4-156 inverter board pinout
Post by: yesyes on Jan 29, 2007, 12:25
hmmmmm, I don't think that is the correct pinout. The inverter board connector only has 15 pins...  :lol: