Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: melalexua on Sep 11, 2005, 01:28

Title: How can I connected GPS PS\2 Maus to USB ???
Post by: melalexua on Sep 11, 2005, 01:28
Hallo All,

please help me to connected USB to PS\2, wenn

Pin Assignment of Standard PS-2 DIN Jack
PIN Signal
1 Tx/RS-232
2 +5VDC
3 Tx(TTL)
4 GND
5 Rx(TTL)
6 Rx(RS-232)

Thank you!

Alex
Title: How can I connected GPS PS\2 Maus to USB ???
Post by: Kocjan on Sep 15, 2005, 18:00
I thint that TX(TTL) is USB D+ and RX(TLL) is USB D-. But I'm not sure. You can try, at Your own risk.
TTL is a 5V standard, and USB is 5V standard too.
Soory for my English :)
Title: How can I connected GPS PS\2 Maus to USB ???
Post by: Anonymous on Sep 17, 2005, 03:59
Quote from: "Kocjan"I thint that TX(TTL) is USB D+ and RX(TLL) is USB D-. But I'm not sure. You can try, at Your own risk.
TTL is a 5V standard, and USB is 5V standard too.
Soory for my English :)


Windows see my new Hardware, but RECOMENDEED reconnect.

Esli neponjatno - winda widit nowoe ustroistwo, kotoroe rabotaet neprawilno. Winda rekomenduet pereconnected eto ustroistwo.
Title: Re: How can I connected GPS PS\2 Maus to USB ???
Post by: B-Art on Feb 27, 2006, 14:47
Quote from: "melalexua"Hallo All,

please help me to connected USB to PS\2, wenn

Pin Assignment of Standard PS-2 DIN Jack
PIN Signal
1 Tx/RS-232
2 +5VDC
3 Tx(TTL)
4 GND
5 Rx(TTL)
6 Rx(RS-232)

Thank you!

Alex


To my knowledge you this PS/2 is a serial connection NOT USB.
Serial and USB are 2 different things  8) . This may be the reason for the reconnect message.  :(