Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: Metlik on Apr 27, 2010, 22:40

Title: Mini LPT (microCentronics 36) to LPT (Centronics 36) adaptor
Post by: Metlik on Apr 27, 2010, 22:40
Hi all!

I have old printer HP LJ1100. To share it in the network I have print-server with standard LPT interface for printers (Centronics 36 male). Problem is that printer have mini Centronics 36 female connector. I made this adaptor:

mini Centronics ------- DB25 (this is original cable) + DB25 -------- Centronics 36 female (hand made cable)

I made it according pin settings for original cables (miniCentronics - DB25 and DB25 - Centronics), like shown here:

(http://www.lubausi.lv/files/temp/pins.png)

But I have problem: after connecting all together printer can print several pages ok, but after that start continiously print a garbage.

Can you help me in this matter? Where is the problem? Maybe there is wrong pin setting?  ???


P.S. By the way this pin settings (http://pinouts.ru/ParallelPortsCables/Printer.shtml) is wrong? Because I tested my original cable (see table) and there is a differencies...