How can I connected GPS PS\2 Maus to USB ???

Started by melalexua, Sep 11, 2005, 01:28

Previous topic - Next topic
|

melalexua

Hallo All,

please help me to connected USB to PS\2, wenn

Pin Assignment of Standard PS-2 DIN Jack
PIN Signal
1 Tx/RS-232
2 +5VDC
3 Tx(TTL)
4 GND
5 Rx(TTL)
6 Rx(RS-232)

Thank you!

Alex

Kocjan

I thint that TX(TTL) is USB D+ and RX(TLL) is USB D-. But I'm not sure. You can try, at Your own risk.
TTL is a 5V standard, and USB is 5V standard too.
Soory for my English :)

Anonymous

Quote from: "Kocjan"I thint that TX(TTL) is USB D+ and RX(TLL) is USB D-. But I'm not sure. You can try, at Your own risk.
TTL is a 5V standard, and USB is 5V standard too.
Soory for my English :)


Windows see my new Hardware, but RECOMENDEED reconnect.

Esli neponjatno - winda widit nowoe ustroistwo, kotoroe rabotaet neprawilno. Winda rekomenduet pereconnected eto ustroistwo.

B-Art

Quote from: "melalexua"Hallo All,

please help me to connected USB to PS\2, wenn

Pin Assignment of Standard PS-2 DIN Jack
PIN Signal
1 Tx/RS-232
2 +5VDC
3 Tx(TTL)
4 GND
5 Rx(TTL)
6 Rx(RS-232)

Thank you!

Alex


To my knowledge you this PS/2 is a serial connection NOT USB.
Serial and USB are 2 different things  8) . This may be the reason for the reconnect message.  :(

|