Is anybody able to clarify a few queries I have with this please? How are the pins numbered (i.e. where is pin 1 in relation to the clip) ? What does it mean when it says "Pin 3 is tied to ground if the connector is present / the PSU is O.K."?
I got a Compaq Proliant ML310 from freecycle, and the PSU was gone. Didn't fancy paying ?120+ for replacement so using a standard ATX that doesn't have 10 pin plug.
Decided just to try what I thought it might be and worked. Linked pin 3 to pin 3 of the ATX connector (a ground). The 10pin plug I found on ebay had the pins numbered so was ok.