- Welcome to Pinouts.ru talks.
PinoutGuide Forum
Recent posts
#81
Сообщения об ошибках, комментарии к материалам / wiring color codes for the c...
Last post by davidivar - Oct 09, 2018, 00:54My connector plug in end of my scan tool was pulled off . Does anyone know the correct location of each wire to the pins at the connector? thank you
#82
Interfaces, Pinouts, Cables / logitech x-530 - just using th...
Last post by swgLRD - Sep 28, 2018, 19:46I recently found an x-530 subwoofer at electronic garbage disposal and i wanted to get it working.Sadly i just fount the sub unit(not the 4 speakers he is usually connected to).So i plugged it in and didnt hear any noise coming from the speaker,so I opened it up and replaced a blown fuse and burned trace,then i though it connets to PC using vga cable so i did that and that gave me signal it works.Speaker started humming and amplifier chips heated up and when i turned to volume knob it was getting louder.So i disconnected a VGA and tried to recreate it but i cant,chips are not turning on and all i can hear is transformer inside.So i was googling and saw this post from this site:http://pinoutguide.com/Home/logitech_x530_front_pinout.shtml and found something useful here but not useful enough.I connected pin 11 and 15 and pin 12 to 8 but nothing.
So I was wondering If anyone knows how to turn on amplifier and speaker and how to feed audio singal to the speaker.Thank you
So I was wondering If anyone knows how to turn on amplifier and speaker and how to feed audio singal to the speaker.Thank you
#83
Interfaces, Pinouts, Cables / USB Type C Pinouts and which t...
Last post by kb8qeu - Jul 25, 2018, 21:23Hi Folks
Since there are too many topics here and not knew where to look, I started the "USB Type C Pinouts and which to use for charging with 5Vdc at 6amps Charge" for the purpose of finding out which pins are for charging.
I have manu power supplies at 5Vdc that uses the 5 mm barel coax connector at 6 amps. I want to make an adapter between the Verizon Force Z and the PSU that I have.
So .... Disgus away and tell me each way to do this. Also source for Type C 3.2 connectors without or with terminals.
Thank you in advance
Ed - KB8QEU[/font]
Since there are too many topics here and not knew where to look, I started the "USB Type C Pinouts and which to use for charging with 5Vdc at 6amps Charge" for the purpose of finding out which pins are for charging.
I have manu power supplies at 5Vdc that uses the 5 mm barel coax connector at 6 amps. I want to make an adapter between the Verizon Force Z and the PSU that I have.
So .... Disgus away and tell me each way to do this. Also source for Type C 3.2 connectors without or with terminals.
Thank you in advance
Ed - KB8QEU[/font]
#84
Обсуждение способов подключения, распиновок, сигналов / DPS-500EB-A
Last post by SKIF - Jun 07, 2018, 11:38Ищу распиновку на данный бп.
#85
Interfaces, Pinouts, Cables / Breakout cable for Arris VIP56...
Last post by mlam - May 14, 2018, 18:38Hello
I whant
Breakout cable ARRIS VIP5662W Wireless IPTV Receiver. for Bell, TELIUS or other
DIN 10 pins male to 6 RCA The pinouts for the 10 pin mini-DIN male proprietary
BREAKAWAY CABLE CONNECTION
Alternative method for video/audio connections. Offers
analog component, composite, and stereo audio outputs.
https://frontier.com/~/media/HelpCenter/Documents/tv/vantage-tv/arris-vip5662w-receiver-user-guide.ashx?la=en
page 10 and 11
Thank you
I whant
Breakout cable ARRIS VIP5662W Wireless IPTV Receiver. for Bell, TELIUS or other
DIN 10 pins male to 6 RCA The pinouts for the 10 pin mini-DIN male proprietary
BREAKAWAY CABLE CONNECTION
Alternative method for video/audio connections. Offers
analog component, composite, and stereo audio outputs.
https://frontier.com/~/media/HelpCenter/Documents/tv/vantage-tv/arris-vip5662w-receiver-user-guide.ashx?la=en
page 10 and 11
Thank you
#86
Interfaces, Pinouts, Cables / HP Vectra VL 6 Power Supply Wi...
Last post by jrenard - Mar 29, 2018, 15:54Hello all,
I have an old HP Vectra VL 6 computer whose Power supply failed.
The power supply connector is very similar to HP vectra VL5 (http://pinouts.ru/Power/hp_vectravl5_power_pinout.shtml) but has a 14th wire (colored grey), placed before pin 1 (as also mentionned by other users in reports section).
Also there is another 4 pin molex connector for 3.3V.
Does anyone knows what is the function of this pin ?
I tried to map a standard ATX power supply instead of the original PSU (based on 12/13 pin version found here) but it does not work. :-\
Any help would be appreciated !
I have an old HP Vectra VL 6 computer whose Power supply failed.
The power supply connector is very similar to HP vectra VL5 (http://pinouts.ru/Power/hp_vectravl5_power_pinout.shtml) but has a 14th wire (colored grey), placed before pin 1 (as also mentionned by other users in reports section).
Also there is another 4 pin molex connector for 3.3V.
Does anyone knows what is the function of this pin ?
I tried to map a standard ATX power supply instead of the original PSU (based on 12/13 pin version found here) but it does not work. :-\
Any help would be appreciated !
#87
Interfaces, Pinouts, Cables / confusing PS2/PS1 AV audio cha...
Last post by zxzzxz - Mar 25, 2018, 10:48hi everyone , i need help please.
iam making an RGB ps1 and ps2 cables (to use with NTSC and PAL consoles) , some sites say that pin2 is the right audio channel and some sites say that its the left audio channel. which is the correct information please?
http://pinouts.ru/Game/PlayStationAV_pinout.shtml
and
https://gamesx.com/avpinouts/psxav.htm
https://retrocomputing.stackexchange.com/questions/2538/what-pins-on-the-ps2-av-out-port-are-the-audio-pins
http://pinouts.ru/Game/playstation_vga_cable_pinout.shtml
many thanks
iam making an RGB ps1 and ps2 cables (to use with NTSC and PAL consoles) , some sites say that pin2 is the right audio channel and some sites say that its the left audio channel. which is the correct information please?
http://pinouts.ru/Game/PlayStationAV_pinout.shtml
and
https://gamesx.com/avpinouts/psxav.htm
https://retrocomputing.stackexchange.com/questions/2538/what-pins-on-the-ps2-av-out-port-are-the-audio-pins
http://pinouts.ru/Game/playstation_vga_cable_pinout.shtml
many thanks
#88
Interfaces, Pinouts, Cables / Help. Wacom Cintiq + Magsafe w...
Last post by Giogiogio4 - Mar 11, 2018, 03:01Anyone here would be able to figure out the correcting wiring for
a Magsafe To this
https://www.digikey.com/products/en/connectors-interconnects/barrel-power-connectors/435?k=cp-056
https://imgur.com/a/ayWHp
http://pinoutguide.com/Power/magsafe_power_pinout.shtml
https://pyra-handheld.com/boards/attachments/img_1074-png.30848/
a Magsafe To this
https://www.digikey.com/products/en/connectors-interconnects/barrel-power-connectors/435?k=cp-056
https://imgur.com/a/ayWHp
http://pinoutguide.com/Power/magsafe_power_pinout.shtml
https://pyra-handheld.com/boards/attachments/img_1074-png.30848/
#89
Interfaces, Pinouts, Cables / hp 1400w flex slot power suppl...
Last post by mahyartb - Feb 12, 2018, 19:22hi guys
i have a hp1400watt felxslot power server
how can i full load this power ?
when connected pin 2 to - power get run but whit 6.67volts
i have a hp1400watt felxslot power server
how can i full load this power ?
when connected pin 2 to - power get run but whit 6.67volts
#90
Interfaces, Pinouts, Cables / 9 pin 2.0 USB to a Reg USB 2....
Last post by BigO - Feb 06, 2018, 00:53I am trying to convert 26 pin Ribbon cable from Dell Floppy Drive to 9 pin Mother Board. I have a picture of the End connector from Ribbon cable to Mother board but can't find out how to post a picture.Is it ok to send me email and i will email picture to anyone that might help me idenify Picture of end cable!Thanks