adapter ide pc to ide notebook

[dfflorio]

hello my name is Daniel and i need cable adapter ide pc to ide notebook 2,5 thank you

[majky]

Hy! As i know this is not an adapter, there is no any tricky, all pinouts are same functions, just smaller.
i suggest that, let's cut at middle an 2,5 cable and an normal IDE cable, and connect cables each by each.

[dfflorio]

but i need conected 12 volts in plug 40 pines

[melcy]

looking at the hard drive, where the key pin is on the bottom, go to the left side, power plugs in there. ground on top.

[melcy]

ascii just for kicks.
viewing from the hard drive's arse

Code Select Expand


1                    22
::::::::::::.:::::::::
23                   44
1 = GND
13 = KEY
23 = 12VDC+


[melcy]

sorry... sorry... ignore the one on top, i wrote it up backwards.
this is correct:

Code Select Expand

1                    22
::::::::::::':::::::::
23                   44
1 = GND
35 = KEY
23 = 12VDC+

[Anonymous]

melcy is completely wrong, do NOT use that pinout.  the extra 4 pins on the end are two +5v, one ground, and one not connected.  look up the individual pinouts.  all toher pins are identical