UPS devices  > HP pinouts
Pin# Signal Type Function
1 RS-232 Earth Ground Signal Common for all RS-232 port signals (earth ground referenced)
2 RS-232 Transmit Output  Serial communication mode - output signal line. 
3 RS-232 Receive Input / Shutdown Serial communication mode - input signal line. Contact Closure mode - shuts down UPS if signal is held high (RS-232 level) for 200 milliseconds while UPS is operating in battery mode.
4 AC Line Fail (normally closed) Contact Closure mode - opened when AC line fails and UPS is operating in battery mode (breaks connection between Pin#4 and Pin#5).
5 Contact Closure Common / RS-232  Common Signal Common for all Contact Closure group / RS-232 Signal Common line.
7 Low Battery (normally open) Contact Closure mode - closed when remaining on-battery runtime drops below the under-defined time limit (makes connection between Pin#7 and Pin#5).
9 AC Line Fail (normally open)  Contact Closure mode - closed when in battery mode (makes connection between Pin#9 and Pin#5).
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the UPS
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
HP PowerWise L600/L900/L1250 UPS interface visual pinout:
HP PowerWise L600/L900/L1250 UPS interface diagram
click to enlarge
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.