Pinouts >  Распиновки разъемов аудио/видео техники  >  Creative pinouts
10 pin single row male connector layout
Разъем 10 pin single row male


1   AGND    Analog Ground
2   Left Out    Left channel
3   Left Ret    Audio backpanel mute (Return)
4   Right Out    Right channel
5   Right Ret    Audio backpanel mute (Return)
6   Mic In   
7   Key pin     Not used
8   Mic VREF out     2.5V
9   Mic in mute     Not used
10   Audio cable detect     Not used

Return pins will mute the back panel when shorted to ground, which is opposite of most modern front panel connectors.

This connector expects a Normally Open plug detection which closes to ground when a jack is inserted.

Most modern front panels expect 5V on Mic VREF, not 2.5V.

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings