Note that all grounds are NOT connected, i.e. isolated from eachother.
MIDI is basic note out/in, no standard midi interface at time of writing (3-jun-2013)
| Pin Number |
Pin Name |
Description |
|---|---|---|
| 1 | DMX2_B(-) | DMX2 - (pin 2) |
| 2 | NC | Not connected |
| 3 | Vcc(5V) | Max 250mA |
| 4 | Midi_out_GND | Pin 2 on DIN5 |
| 5 | Midi_out_Vcc | Pin 4 on DIN5 |
| 6 | Midi_out | Pin 5 on DIN5 |
| 7 | Midi_IN+ | Pin 4 on DIN5 |
| 8 | Midi_IN- | Pin 5 on DIN5 |
| 9 | DMX2_GND | DMX2 Ground* |
| 10 | DMX2_A(+) | DMX2 + (pin 3) |
| 11 | DMX1_A(+) | DMX1 + (pin 3) |
| 12 | DMX1_B(-) | DMX1 - (pin 2) |
| 13 | DMX1_GND | DMX1 Ground* |
| 14 | NC | Not connected |
| 15 | NC | Not connected |
Both silkscreen and breakout cable match
Comments:
DMX1 IN and DMX1 OUT are most probably wired in parallel to the same pins 11/12/13, since you can't use DMX1 IN and OUT simultaneously.
правильная
с ошибками