Pinouts >  Распиновки разъемов аудио/видео техники  >  Razer pinouts

10 pins connector
Pinout of the front panel audio connector (labeled J26 on the card)
Pin Pin
Name		 Description
1 Mic Input Signal Front panel microphone input signal (biased when supporting stereo microphone)
2 Analog Ground Ground used by analog
3 Mic Power Microphone power / additional MIC input for stereo microphone support
4 +5V Filtered +5 V used by analog audio circuits
5 Right Channel Audio to front Right channel audio signal to front panel (headphone drive capable)
6 Right Channel Audio from front Right channel audio signal return from front panel (when headphones unplugged)
7 Analog Ground Ground used by analog audio circuits
8 No Pin  
9 Left Channel Audio to front Left channel audio signal to front panel (headphone drive capable)
10 Left Channel Audio from front Left channel audio signal return from front panel (when headphones unplugged)

Pinout of the connection for front panel audio on the Razer Barracuda AC-1 sound card


 

Статус распиновки: +1 -0
На распиновку Razer Barracuda AC-1 Front Panel Audio Connector есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: /www.razersupport.com
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings