Pin Number |
W/C | Signal |
---|---|---|
2 | B | Pre amp sound signal front LH (+) Out |
3 | W | Pre amp sound signal front LH (-) Out |
4 | B | Pre amp sound signal rear LH (+) Out |
5 | W | Pre amp sound signal rear LH (+) Out |
6 | G | Steering switch signal A Press SOURCE switch. 0 V Press UP switch. 1.0 V Press DOWN switch. 2.0 V Press loadtalk switch 3.0 V Press ENTER switch. 4.0 V Except for above. 5.0 V |
7 | G | ACC power supply |
10 | BR | Pre amp sound signal shield |
11 | W | Pre amp sound signal front RH (+) Out |
12 | B | Pre amp sound signal front RH (-) Out |
13 | B | Pre amp sound signal rear RH (+) Out |
14 | W | Pre amp sound signal rear RH (-) Out |
15 | B | Steering switch signal ground |
16 | W | Steering switch signal B Press VOL DOWN switch. 0 V Press VOL UP switch. 1.0 V Press PHONE switch. 2.0 V Press BACK switch. 3.0 V Except for above. 5.0 V |
19 | Y | Battery power supply |
20 | GR | Ground |
W/C stands for Wire Color. It is for Infinity QX60 2014 and very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
24 | W | Auxiliary sound signal LH (+) In |
26 | W | Headphone sound signal LH (+) Out |
27 | B | Headphone sound signal RH (+) Out |
37 | shield | |
38 | R | Auxiliary sound signal RH (+) In |
39 | B | Auxiliary sound signal LH (-), RH (-) In |
40 | R | Headphone sound signal LH (-) Out |
41 | G | Headphone sound signal RH (-) Out |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
53 | G | Parking brake signal Parking brake is applied. 0 V Parking brake is released. 4.5 V |
55 | W | Composite image signalground |
56 | B | Composite image signal |
57 | BG | I-Key memory |
58 | G | AV-ACC (DCM) |
59 | shield | Microphone signal shield |
60 | W | Microphone voltage Out (5V) |
61 | W | Communication signal(CONT→DISP) |
62 | P | CAN–L |
63 | LG | AV communication signal (L) |
64 | LG | AV communication signal (L) terminate |
67 | P | MR output |
68 | LG | Ignition signal |
69 | R | Reverse signal Selector lever is in R position. Battery voltage Selector lever is in other than R position. 0 V |
70 | BG | Vehicle speed signal (8-pulse) |
71 | shield | Composite image signal shield |
72 | R | Composite image synchro-nizing signal |
75 | B | Microphone signal |
76 | shield | Communication signal shield |
77 | B | Communication signal(DISP→CONT) |
78 | L | CAN–H |
79 | SB | AV communication signal (H) |
80 | SB | AV communication signal (H) terminate |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
91 | W | Auxiliary image signal In |
92 | B | Auxiliary image signal ground |
94 | shield | Auxiliary image signal shield |
97 | Y | Disk eject signal |
98 | V | Switch ground |
105 | W | Composite image signalground |
106 | shield | Composite image signal shield |
107 | B | Composite image signal |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
122 | B | Sound signal guide |
123 | W | Sound signal guide ground |
124 | B | Pre amp sound signal subwoofer |
125 | W | Pre amp sound signal center |
126 | Y | Pre amp sound signal shield |
131 | shield | Sound signal guide shield |
132 | W | Pre amp sound signal subwoofer ground |
133 | B | Pre amp sound signal center ground |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
137 | W | VBUS signal (USB interface) |
138 | G | USB ground |
139 | L | USB D+ signal |
140 | R | USB D− signal |
141 | shield | USB shield |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
145 | B | USB D- signal (Telematics) |
146 | B | USB VBUS signal (Telematics) |
147 | W | Manufacturer specific signal (Telematics) |
151 | L | VOICE ground (Telematics) |
152 | W | U-VOICE signal (Telematics) |
153 | L/W | USB D+ signal (Telematics) |
154 | shield | USB ground |
160 | B | D-VOICE signal (Telematics) |
161 | shield | USB shield (Telematics) |
W/C stands for Wire Color. It is very dependent on model and model year.
Pin Number |
W/C | Signal |
---|---|---|
162 | shield | RGB digital image signal shield |
163 | shield | RGB digital image signal shield |
164 | B | RGB digital image signal(−) |
165 | B | RGB digital image signal(+) |