Pinouts >  Разъемы автомагнитол Lexus и Toyota  >  Toyota Corolla pinouts
16 pin (10+6) Toyota Head Unit proprietary connector layout
Разъем 16 pin (10+6) Toyota Head Unit proprietary
Matsushita CQ-TS7471A, p/n 86120-12880

Head unit pinout signals explained

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
Lin Line out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

T/M This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
12 pin Toyota/Lexus Head Unit proprietary connector layout
Разъем 12 pin Toyota/Lexus Head Unit proprietary
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2022 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.