NOT TESTED!
| Pin Num |
W/C w/amp |
W/C w/o amp |
Signal | details |
|---|---|---|---|---|
| A1 | R | LA-R | FR+ | Sound signal (Right) |
| A2 | B | LA-B | FL+ | Sound signal (Left) |
| A3 | GR | ACC1 | Power source (ACC) |
|
| A4 | W | +B1 | Power source (+B) |
|
| A5 | G | LA-G | FR- | Sound signal (Right) |
| A6 | W | LA-W | FL- | Sound signal (Left) |
| A7 | W-B | GND1 | Ground | |
| A10 | G | ILL+ | Illumination signal |
|
| B1 | L | RR+ | Sound signal (Rear) |
|
| B2 | V | RL+ | Sound signal (Rear) |
|
| B3 | LG | RR- | Sound signal (Rear) |
|
| B4 | shield | |||
| B5 | BE | ILL- | Illumination signal |
|
| B6 | B | RL- | Sound signal (Rear) |
|
W/C stands for Wire Color. It is for Tacoma 2015 and is very dependent on model and model year.
| Pin Num |
W/C | Signal | details |
|---|---|---|---|
| 3 | Y | ||
| 4 | R | ||
| 8 | B |
W/C stands for Wire Color. It is for Tacoma 2015 and is very dependent on model and model year.
| Pin Num |
W/C | Signal | details |
|---|---|---|---|
| 3 | B | CNH1 | Local bus communication signal |
| 4 | W | CNL1 | Local bus communication signal |
| 11 | B | CA+ | Power source |
| 12 | R | V+ | Display signal |
| 23 | shield |
W/C stands for Wire Color. It is for Tacoma 2015 and is very dependent on model and model year.
| Pin Num |
W/C | Signal | details |
|---|---|---|---|
| 1 | LG | IG | Illumination signal |
| 2 | GR | REV | Reverse signal |
| 4 | R | MACC | Microphone power supply (4-6V) |
| 5 | G | MIN+ | Microphone voice signal |
| 6 | W | SNS2 | Microphone connection detection signal |
| 7 | BE | TX1+ | AVC-LAN communication signal |
| 8 | P | TX1- | AVC-LAN communication signal |
| 11 | shield | ||
| 15 | Y | PKB | Parking brake signal |
| 16 | SB | MUT1 | Mute signal Audio system playing Above 3.5 V Audio system changing modes Below 1 V |
| 17 | V | SPD | Vehicle speed signal |
| 18 | shield | ||
| 19 | B | MIN - | Microphone voice signal |
| 21 | V | SW1 | Steering pad switch signal No switch pushed 2.97 to 3.56 V Up switch pushed 0.27 to 0.35 V Down switch pushed 0.86 to 1.03 V Volume+ switch pushed 1.51 to 1.79 V Volume- switch pushed 2.22 to 2.66 V |
| 22 | Y | SW2 | Steering pad switch signal No switch pushed 2.97 to 3.56 V MODE/HOLD switch pushed 0.27 to 0.35 V On hook switch pushed 0.86 to 1.03 V Off hook switch pushed 1.51 to 1.79 V Voice switch pushed 2.22 to 2.66 V |
| 23 | SB | SWG | Steering pad switch ground |
| 25 | W-B | ADPG | External device connection detection signal |
| 26 | W | VAR+ | Sound signal (Right) |
| 27 | R | VA - | Ground |
| 28 | B | VAL+ | Sound signal (Left) |
W/C stands for Wire Color. It is for Tacoma 2015 and is very dependent on model and model year.
| Pin Num |
W/C | Signal | details |
|---|---|---|---|
| 1 | UPO | ||
| 2 | UDO- | ||
| 3 | UDO+ | ||
| 4 | UESG | ||
| 5 | shield | ||
| 1 | USV4 | with SDARS system | |
| 2 | US4- | ||
| 3 | US4+ | ||
| 4 | USGO4 | ||
| 5 | USG4 |
W/C stands for Wire Color. It is for Tacoma 2015 and is very dependent on model and model year.
правильная
с ошибками
