Pinouts >  Разъемы автомагнитол Lexus и Toyota  >  Toyota Tundra pinouts
16 pin (10+6) Toyota Head Unit proprietary connector layout
Разъем 16 pin (10+6) Toyota Head Unit proprietary
at the radio
p/n 868040C100 (w/o SDARS), 861000C121 ? Also for 86100-0C110 86100-0c192 86100-0C111, , 86100-0C191, 86140-0C040 86140-0C050 86100-0C191 86140-0C010, 86140-0C130. Panasonic.
Для этой распиновки есть 1 совместимых устройств. Показать>

 

p/n 868040C100

16 pin (10+6) Toyota Head Unit proprietary with numbering
J137  /  J138

Pin
Num		 Signal - Ground wire
color		 Option Description
A1 J137-1 (FR+)
- J137-7 (GND1)		 BE - W-B 7 or 9 Speakers Sound signal (Front right)
G - W-B 4 or 6 Speakers
A2 J137-2 (FL+) -J137-7 (GND1) B - W-B   Sound signal (Front left)
A3 J137-3 (ACC1) -J137-7 (GND1) GR - W-B   Power source (ACC). 11-14V when ignition switch ACC
A4 J137-4 (+B1) -J137-7 (GND1) V - W-B   Power source (+B) 11-14V constant.
A5 J137-5 (FR-) -J137-7 (GND1) LG - W-B 7 or 9 Speakers Sound signal (Front right)
R - W-B 4 or 6 Speakers
A6 J137-6 (FL-) -J137-7 (GND1) V - W-B 7 or 9 Speakers Sound signal (Front left
BE - W-B 4 or 6 Speakers
A7 J137-7 (GND1) - Body ground W-B - Body ground   Ground
A9 J137-9 (AMP) -J137-7 (GND1) G - W-B 7 or 9 Speakers Power source of stereo component amplifier (11-14V)
A10 J137-10 (ILL+) -J137-7 (GND1) SB - W-B   Illumination signal 11-14V when Light control switch in tailor head position.
B1 J138-1 (RR+) - J137-7 (GND1) BR -W-B except 4 Speakers Sound signal (Rear right)
B2 J138-2 (RL+) -J137-7 (GND1) Y - W-B except 4 Speakers Sound signal (Rear left)
B3 J138-3 (RR-) - J137-7 (GND1) V - W-B 7 or 9 Speakers Sound signal (Rear right)
LG - W-B 6 Speakers
B5 J138-5 (ILL-) - J137-7 (GND1) SB - W-B Illumination signal Pulse generation when Headlight dimmer switch assembly in tail or head position
B6 J138-6 (RL-) -J137-7 (GND1) P - W-B 7 or 9 Speakers Sound signal (Rear left)
B - W-B 6 Speakers

 

28 pin Nissan Head Unit Aux with numbering
J139 (28 pin)

Pin
Num		 Signal - Ground wire
color		 Option Description
1 J139-1 (IG) - J137-7 (GND1) P - W-B   Power source (IG). 11-14V when Ignition switch ON.
2 J139-2 (REV) - J137-7 (GND1) Y - W-B   Reverse signal.
4 J139-4 (MACC) -J137-7 (GND1) L- W-B   Microphone power supply. 4 to 6V when Ignition switch ACC
5 J139-5 (MIN+) -J137-7 (GND1) B - W-B   Microphone voice signal
6 J139-6 (SNS2) -J137-7 (GND1) LG - W-B   Microphone connection detection signal (always <1V)
9 J139-9 (CANH) LG   CAN communication signal
10 J139-10 (CANL) W   CAN communication signal
11 J139-11 (AGND)- Body ground     Shield Ground
15 J139-15 (PKB) -J137-7 (GND1 R - W-B   Parking W-Bake signal
17 J139-17 (SPD) -J137-7 (GND1) W - W-B   Vehicle speed signal from combination meterassembly
18 J139-18 (SGND)- J137-7 (GND1) Shield - W-B   Shield Ground
19 J139-19 (MIN-) -Body ground Y - Body ground   Microphone voice signal
21 J139-21 (SW1) -J139-23(SWG) G - Y w/ Steering Pad Switch Steering pad switch signal
No switch pushed 2.97 to 3.56 V
Up switch pushed 0.27 to 0.35 V
Down switch pushed 0.86 to 1.03 V
Volume+ switch pushed 1.51 to 1.79 V
Volume- switch pushed 2.22 to 2.66 V
22 J139-22 (SW2) -J139-23(SWG) GR - Y w/ Steering Pad Switch Steering pad switch signal
No switch pushed 2.97 to 3.56 V
MODE/HOLD switch pushed 0.27 to 0.35 V
On hook switch pushed 0.86 to 1.03 V
Off hook switch pushed 1.51 to 1.79 V
Voice switch pushed 2.22 to 2.66 V
23 J139-23 (SWG) - Body ground Y - Body ground w/ Steering Pad Switch Steering pad switch signal ground
24 J139-24 (SW3) -J139-23 (SWG) L - Y   Steering pad switch signal
No switch pushed 2.97 to 3.56 V
Enter switch pushed 0.27 to 0.35 V
Back switch pushed 0.86 to 1.03 V
Right switch pushed 1.51 to 1.79 V
Left switch pushed 2.22 to 2.66 V
25 139-25 (ADPG)- J137-7 (GND1) SB - W-B   External device connection detection signal. <1V when connected, otherwise 2-3V
26 J139-26 (VAR+)- J139-27 (VA-) B - Y   Sound signal (Right) External device playing audio (When stereo jack used)
27 J139-27 (VA-) -J137-7 (GND1) Y - W-B   Sound signal ground
28 139-28 (VAL+) -J139-27 (VA-) L - Y   Sound signal (Left). External device playing audio (When stereo jack used)

 

8 pin Toyota Head Unit with numbering

L2 8-pin connector

Pin
Num		 Signal - Ground wire
color		 Option Description
3 L2-3 (ACC2) -J137-7 (GND1) Y - W-B w/ SDARS System Power source (ACC)
4 L2-4 (+B2) -J137-7 (GND1)* R - W-B w/ SDARS System Power source (+B)
8 L2-8 (GND2) - Body ground* B - Body ground w/ SDARS System Ground

 

5 pin Toyota USB plug with numbering

J122 5-pin

Pin
Num		 Signal - Ground wire
color		 Option Description
1 J122-1 (USV1)     Power source
2 J122-2 (US1-)     Data signal
3 J122-3 (US1+)     Data signal
4 J122-4 (USD1)     Ground
5 J122-5 (USG1)     Shield Ground

 

K5 5-pin

Pin
Num		 Signal - Ground wire
color		 Option Description
1 K5-1 (USV4)   w/ SDARS System Power source
2 K5-2 (USV4-)   w/ SDARS System Data signal
3 K5-3 (USV4+)   w/ SDARS System Data signal
4 K5-4 (USGD4)   w/ SDARS System Ground
5 K5-5 (USG4)   w/ SDARS System Shield Ground

 

Omitted pins are Not Connected.

28 pin Nissan Head Unit Aux connector layout
Разъем 28 pin Nissan Head Unit Aux
at the radio (numbering is reversed!)
Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств

Additional connector №3

12 pin Toyota/Lexus Head Unit proprietary connector layout
Разъем 12 pin Toyota/Lexus Head Unit proprietary
at the radio

Additional connector №4

8 pin Toyota Head Unit connector layout
Разъем 8 pin Toyota Head Unit
at the radio

Additional connector №5

5 pin Toyota USB plug connector layout
Разъем 5 pin Toyota USB plug
at the radio
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings