Распиновка Olympus E-PL2, E-P2, E-P1, E-620, E-30, E-400, E-510, E-520, XZ-1, SZ-20, SZ-30 MR, SP-565, SP-570, SP-590 cameras USB/Video/shutter connector and USB cable

• Задать вопрос
• Comment
• Редактировать
• добавить новую

should also work with C-5500 Sport Zoom, C-7000 Zoom, D-425, D-435, D-545 Zoom, D-595 Zoom, D-630 Zoom Evolt E-330, Evolt E-500, FE-140, FE-130, FE-120, SP-310, SP-320, SP-350, SP-500Z, SP-500 UZ, SP-700 Stylus Digital 500, Stylus Digital 600, Stylus Digital 700, Stylus Digital 710, Stylus Digital 720 SW, Stylus Digital 800 Stylus 810, Stylus Verve, Stylus Verve S

Olympus connector pinout:

Pin Number	Pin Name	Description
1	USB D+
2	USB D-
3	AUDIO OUT	mono
4	SHUTTER
5	VIDEO OUT
6	GROUND
7	USB +5V
8	FOCUS
9	USB GND
10	GND
11	Video GND
12	enable video output	pull to ground to activate
shell	GND

The video out is composite video.

The shutter and focus inputs operate these functions identically to pressing the button on the camera itself. Connect to ground to operate.

Pin 12 enables video output. When pulled low the main camera display is shut off and composite video is output. (It does not seem possible to have both video out and camera display active simultaneously, at least not on the E-P1 tested.) Tested on Olympus E-P1 firmware version 1.0. When pin 12 is left unconnected the camera pulled it to around 3.2V while on.

Olympus USB cable scheme:

photo C-70Z Pin Name	C-70Z Pin Number	Direction	PC Pin Number	PC Pin Name	Description
GND	9	---	4	GND
D+	2	---	2	D+
D-	1	---	3	D-
Vcc	7	---	1	Vcc