Pinouts >  Разъемы приемников GPS  >  Lowrance pinouts
Signal and audio for the iFinder PhD, H2O, Hunt, and other units.
bottom of the unit Pin Pin
1 ext. power 3.3v externally regulated. DO NOT FEED WITH 12 VOLTS!
2 serial in RS232 data, connect straight to PC com port
3 serial out RS232 data, connect straight to PC com port
4 ground signal ground
5 headphone select ground this pin to disable internal beeper and send audio out connector instead
6 left audio for the firmwares mp3/ogg player, of course
7 right audio and the waypoint voicenote feature, too

The PC-DI7 cable uses four pins, but doesnt bring out the audio connections for simultaneous use as an audio player.

На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2023 by team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.