Pinouts >  Разъемы гарнитур и наушников и т.д.  >  Palm pinouts
4 pin 3.5mm (2.5mm) plug connector layout
Разъем 4 pin 3.5mm (2.5mm) plug
at the PalmOne Tungsten C
4-Connector Jack on PalmOne?s Tungsten C. Speaker is Mono. Connect Micro direct to Pin 2 and 4, and also a Button in Line with a 48 Ohm Resistor.
Для этой распиновки есть 1 совместимых устройств. Показать>
PalmOne Tungsten C Pin Pin
Name		 Description
1 Speaker + Earspeaker (Mono) +
2 Microphone + Microphone (and Button over 48E, and also a Diode)
3 Speaker - Earspeaker (Mono) -
4 Ground Ground, 0V

 

 
Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings