| Device 1 Pin Number |
Device 1 Pin Name |
Direction | Device 2 Pin Number |
Device 2 Pin Name |
Description |
|---|---|---|---|---|---|
| 2 | RxD | 1 | |||
| 3 | TxD | 2 | |||
| 7 | RTS | 3 | may be N/C | ||
| 5 | GND | 4 |
After 1-2 minutes, Aten closes the port. If you want to control the device through a computer or other devices (for example Crestron CP2E) and be sure that the device will execute the command. 1. The OPEN command (to open the port) 2. Next, a command for the device (for example, sw i01)
правильная
с ошибками