Pinouts >  Распиновки кабелей и переходников для клавиатур, мышей и т.д.  >  Belkin pinouts
25 pin D-SUB female connector layout
Разъем 25 pin D-SUB female
Building Scheme for Belkin KVM Cables F1D9300-XX (PS/2 Style) and F1D9301-XX (USB Style)
Pin Pin
Name		 Description
1 USB VCC F1D9301-XX: To USB Cable Pin 1 (+5 VDC)
2 USB D+ F1D9301-XX: To USB Cable Pin 3 (Data +)
3 PS/2 (Keyb) DATA F1D9300-XX: To PS/2 Keyboard Cable Pin 1 (Data)
4 PS/2 (Keyb) CLOCK F1D9300-XX: To PS/2 Keyboard Cable Pin 5 (Clock)
5 PS/2 (Mouse) DATA F1D9300-XX: To PS/2 Keyboard Cable Pin 1 (Data)
6 PS/2 (Mouse) CLOCK F1D9300-XX: To PS/2 Keyboard Cable Pin 5 (Clock)
7 VGA SDA F1D9300-XX, F1D9301-XX: To VGA Cable Pin 12 (DDC Serial Data Line)
8 VGA SCL F1D9300-XX, F1D9301-XX: To VGA Cable Pin 15 (DDC Data Clock Line)
9 VGA VSYNC F1D9300-XX, F1D9301-XX: To VGA Cable Pin 14 (Vertical Sync)
10 VGA HSYNC F1D9300-XX, F1D9301-XX: To VGA Cable Pin 13 (Horizontal Sync)
11 VGA BLUE F1D9300-XX, F1D9301-XX: To VGA Cable Pin 3 (Blue Video)
12 VGA GREEN F1D9300-XX, F1D9301-XX: To VGA Cable Pin 2 (Green Video)
13 VGA RED F1D9300-XX, F1D9301-XX: To VGA Cable Pin 1 (Red Video)
14 USB D- F1D9301-XX: To USB Cable Pin 2 (Data -)
15 USB GND F1D9301-XX: To USB Cable Pin 4 (Ground)
16 PS/2 (Keyb) VCC F1D9300-XX: To PS/2 Keyboard Cable Pin 4 (+5 VDC)
17 PS/2 (Keyb) GND F1D9300-XX: To PS/2 Keyboard Cable Pin 3 (Ground)
18 PS/2 (Mouse) VCC F1D9300-XX: To PS/2 Mouse Cable Pin 4 (+5 VDC)
19 PS/2 (Mouse) GND F1D9300-XX: To PS/2 Mouse Cable Pin 3 (Ground)
20 VGA ID0 (??) F1D9300-XX, F1D9301-XX: [MAYBE] To VGA Cable Pin 11 (Monitor ID Bit 0)
21 VGA GND F1D9300-XX, F1D9301-XX: To VGA Cable Pin 5 (Ground)
22 VGA SYNC GND F1D9300-XX, F1D9301-XX: To VGA Cable Pin 10 (Sync Ground)
23 VGA BLUE GND F1D9300-XX, F1D9301-XX: To VGA Cable Pin 8 (Blue Ground)
24 VGA GREEN GND F1D9300-XX, F1D9301-XX: To VGA Cable Pin 7 (Green Ground)
25 VGA RED GND F1D9300-XX, F1D9301-XX: To VGA Cable Pin 6 (Red Ground)

After searching a lot for a scheme I've decided to try to build at my own and there's my results. I've tested both cables (PS/2 and USB) on CRT and LCD screens and works very fine.

Comment: In my case pin 25 and 13 are changed. 13 is VGA RED GND and 25 is VGA RED

 

Статус распиновки: +2 -1
На распиновку Belkin OmniView MATRIX2 Series KVM Switch (F1DM208T, F1DM216T) есть 3 отзыв(а): 2 положительных и 1 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Antares
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.