Pinouts >  Распиновки разных разъемов на материнской плате  >  HP pinouts

5 pins connector
HP Server 5 pin Fan connector (DL580 G7)

Not the HP Z-series workstation CPU fan!

Pin
Number		 Pin
Name		 Description
1   PWM Blue
2   Gnd Black
3 V+  Red
4 Gnd Black
5 Sense Yellow

Pin 2 is just to detect if there is a fan connected.

To make the DL580G7 work without ILO3 error you have to bridge the 2 Grounds also with the Sense of the Server.

If you want to install a normal PWM Fan you have to connect the following pins.

5 Pin
HP Fan Connector		 4 Pin
PWM		 Description
Pin 1  Pin 4 PWM
Pin 2  Pin 1 Gnd
Pin 3 Pin 2  V+
Pin 4 Pin 1 Gnd
Pin 5 Pin 3 Sense

 

Alternative pinout

Pin
Number		 Pin
Name
1   GND
2  V+
3 Sense
4 PWM
5 Jumper to pin 1

 

4 pin fan cable connector layout
Разъем 4 pin fan cable
Статус распиновки: +2 -0
На распиновку HP Server 5 pin Fan connector есть 5 отзыв(а): 2 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings