Pin Number |
Pin Name |
Description |
---|---|---|
1 | Headphones | Left |
2 | Headphones | GND |
3 | Headphones | Right |
4 | ? | |
5 | Mic in | Left |
6 | ? | |
7 | Mic in | Right |
8 | Mic | GND |
9 | ? | |
10 | ? | |
11 | ? | |
12 | Ground | GND |
13 | ? | |
14 | ? | |
15 | Diag LED 3 | |
16 | ? | |
17 | Hard Drive LED | -ve |
18 | Diag LED 2 | |
19 | ? | |
20 | Pwr LED Green | -ve (note 1) |
21 | (missing) | 'Key' |
22 | Pwr LED Oragge | -ve (note1) |
23 | PWR ON | switch to Gnd |
24 | LAN LED | +ve |
25 | ? | |
26 | LAN LED | Gnd |
27 | PWR ON | Gnd |
28 | GND | |
29 | GND | |
30 | GND | |
31 | GND | |
32 | ? | |
33 | USB #1p4 | +5v (note 2) |
34 | USB #1p3, Data | |
35 | USB #1p2, Data | |
36 | Gnd | |
37 | USB #2p3, Data | |
38 | USB #2p2, Data | |
39 | USB #2p4 | +5v (note 2) |
40 | ? |
Note 1. The power LED is a 'bi-colour' type'. The voltage on the control pair is reversed to switch from one colour to the other (so +5v / 0v is Orange, 0v / +5v is Green
Note 2. The USB 5v fuses are on the motheboard (replacing the front panel board won't fix a blown fuse)