This port is based on the Ethernet connector, but has a completely different pinout known as MT Network. It is used to connect various MT devices that support it. WARNING!: DO NOT MIX UP WITH ETHERNET!!
| Pin Number |
Pin Name |
Description |
|---|---|---|
| 1 | PWR | Positive 3V power(A). |
| 2 | GND | Negative 3V power/data ground(K). |
| 3 | ATLX_X | Reserved two-way Anatlex data channel 1(X). |
| 4 | DATA1 | Two-way data channel 1(P). |
| 5 | ATLX_L | Reserved two-way Anatlex data channel 2(L). |
| 6 | DATA2 | Two-way data channel 2(N). |
| 7 | RAI | CG-RA mid-level Anatlex data channel(R). |
| 8 | PHONE | Telephone line(Y). |
правильная
с ошибками