PDA, Tablet PC, MP3 players and other portable devices  > Apple pinouts
From iPod to dash/arm rest jack
Dash/Arm rest jack Pin
Dash/Arm rest jack Pin
Direction iPod Pin
iPod Pin
+3.3 VDC Out 1 <-- 18 +3.3 VDC Out 3.3 Positive VDC from iPod
GND 2 --- ? Connector Metal sleeve protecting iPod connector. Not the jacket around the cable.
Firewire GND 6 --- 29 Firewire GND Ground for main iPod power
Line Out, Common GND 7, 8 --- 1, 2 Line Out, Common GND Audio Left/Right Ground
Line Out, Right + 9 <-- 3 Line Out, Right + Audio Right, Postive
Line Out, Left + 10 <-- 4 Line Out, Left + Audio Left, Positive
Serial GND 11 --- 11 Serial GND Serial Control, Ground
Serial Tx 12 <-- 12 Serial Tx Data from iPod to Jack
Serial Rx 13 --> 13 Serial Rx Data from Jack to iPod
USB GND 14 --- 15 USB GND USB Ground (internally connected to iPod pin 16)
Firewire PWR 15 --> 20 Firewire PWR Main iPod power +12VDC
USB GND 16 --- 16 USB GND USB Ground (internally connected to iPod pin 15)
    -?- 21 UNUSED Scion radios do not use A.i.R.
UNUSED 2 -?-      
UNUSED 3 -?-      
UNUSED 4 -?-      

Maybe I just metered wrongly...a couple of times...but, pin 2 on the jack meters to the metal sleeve of the iPod connector. I believe it may be just a regular ground, but I'm not 100% sure.

Pin 2 is connected to the metal sleeve. Also the connector at the Dash/Arm rest is called gt10s-16ds-hu


16 pin unspecified connector layout
16 pin unspecified connector
at the iPod
30 pin iPOD proprietary of Apple iPod Scion adaptor cable connector layout
30 pin iPOD proprietary connector
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
Apple iPod Scion adaptor cable visual pinout:
Apple iPod Scion adaptor cable diagram
click to enlarge
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.