Pinouts >  Распиновки кабелей и разъемов оборудования торговой точки: сканнеров, принтеров, касс  >  ELO pinouts
19 pin Micro-HDMI (type D) connector layout
Разъем 19 pin Micro-HDMI (type D)
at the monitor input
Custom cable for ELO ET1302L and similar monitor models

 

Device 1
Pin Number		 Device 1
Pin Name		 Direction Device 2
Pin Number		 Device 2
Pin Name		 Description
1 Ground   5 Ground Ground
2 N/C - - - N/A
3 Red input 1 Red Red video signal
4 Ground   4, 10, 11 Ground Ground wires
5 Red Ground   6 Red Ground Red video signal ground
6 Vsync input 14 Vsync Vertical sync signal
7 N/C - - - N/A
8 Hsync input 13 Hsync Horizontal sync signal
9 Green input 2 Green Green vide signal
10 Ground   4, 10, 11 Ground Ground wires
11 Green Ground   7 Green Ground Green video signal ground
12 Blue input 3 Blue Blue video signal
13 Ground   4, 10, 11 Ground Ground wires
14 Blue Ground   8 Blue Ground Blue video signal ground
15 N/C - - - N/A
16 N/C - - - N/A
17 SCL input 15 SCL SCL identification clock line
18 SDA input 12 SDA SDA identification data line
19 +5V power 9 +5V +5V output from video card

 

15 pin highdensity D-SUB male connector layout
Разъем 15 pin highdensity D-SUB male
at the graphics card output
Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings