Pinouts >  Распиновки кабелей и разъемов оборудования торговой точки: сканнеров, принтеров, касс  >  Eyoyo pinouts
10 pin RJ50 (10P10C) male connector layout
Разъем 10 pin RJ50 (10P10C) male
This cable lets you connect the barcode reader to a computer.
Device 1
Pin Number
Device 1
Pin Name
Device 2
Pin Number
Device 2
Pin Name
4 Ground 4


5 D- 2 D-
6 D+ 3 D+
7 +5V 1 +5V

Omitted pins are Not Connected.

Note It is possible to connect an RJ-45 instead of the RJ-50 but RJ45 pins start at 2 compared to RJ-50. Subtract 1 from the RJ-50 pins shown here. Pinout was determined by opening the unit and reading the silkscreen.

4 pin USB A plug connector layout
Разъем 4 pin USB A plug
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Copyright © 2000-2024 by team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings