Pinouts >  Распиновки разъемов кабелей питания компьютера  >  DELL pinouts
20 pin MiniFit Jr 5566-20 male (MOLEX 39-29-9202) connector layout
Разъем 20 pin MiniFit Jr 5566-20 male (MOLEX 39-29-9202)
at the motherboard
This non-standard ATX wiring is used in Dell Pentium II and Pentium III systems.
wire side view:
Color Signal Pin Pin Signal Color
Gray      /PS_On 11 1 +5V      Red
Black   GND 12 2 GND   Black
Black   GND 13 3 +5V   Red
Black   GND 14 4 GND   Black
White   -5V 15 5 Power_Good   Orange
Red   +5V 16 6 +5VSB (standby)   Purple
Red   +5V 17 7 +12V   Yellow
Red   +5V 18 8 -12V   Blue
KEY (blank)   - 19 9 GND   Black
Red   +5V 20 10 GND   Black
18 AWG is recommended for all wires except pin 11, which should be 22 AWG. For 300W configurations 16 AWG is recommended.
 
The connector on the power supplies used in Dell Socket 478 Pentium 4 systems (and other modern Dell computers ?) is standard ATX-12v.
 
Note: some Dell power supplies do not have the -5 (white wire), (2002 v1.2 made optional, 2004 v2.01 removed from specification)

Pin 19 (blank) on the 20 pin connector type may have a brown wire installed there (at least on PS-5231-1 power source). 

20 pin MiniFit Jr 5557-20 female (MOLEX 39-01-2200) connector layout
Разъем 20 pin MiniFit Jr 5557-20 female (MOLEX 39-01-2200)
at the cable
Статус распиновки: +54 -2
На распиновку DELL ATX motherboard Power Supply есть 58 отзыв(а): 54 положительных и 2 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: DELL ATX design, http://pinouts.ru/Power/atxpower_pinout.shtml
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings