System appears to use ATX signalling.
| System Board Pin | Pin Name |
Description |
| 1 | PwrGood | (Blue) Power Ok (+5V & +3.3V is ok) |
| 2 | V_STBY | (Orange) Standby Voltage |
| 3 | +5V | Red |
| 4 | +5V | Red |
| 5 | +5V | Red |
| 6 | +5V | Red |
| 7 | +5V | Red |
| 8 | +3V | Brown |
| 9 | +3V | Brown |
| 10 | +3V | Brown |
| 11 | +3V | Brown |
| 12 | +3V | Brown |
| 13 | Remote On | (White) Power Supply On |
| 14 | -5V | Purple |
| 15 | -12V | Green |
| 16 | +12V | Yellow |
| 17 | Ground | Black |
| 18 | Ground | Black |
| 19 | Ground | Black |
| 20 | Ground | Black |
| 21 | Ground | Black |
| 22 | Ground | Black |
| 23 | Ground | Black |
| 24 | Low Power | Grey |

