Pinouts >  Схемы кабелей для последовательных портов  >  Cyclades pinouts
8 pin RJ45 (8P8C) male connector layout
Разъем 8 pin RJ45 (8P8C) male

This cable is used to connect a piece of RS-232 DTE equipment (such as a router's serial management port or server's serial port) to a Cyclades brand terminal server. Connections listed more than once are correctly connected twice (eg: pin 2 on the Cyclades end goes to both pins 6 and 2 on the device end.)

Cyclades
Pin Number
Cyclades
Pin Name
Device
Pin Number
Device
Pin Name
2 DTR 6 DSR
2 DTR 1 DCD
3 TxD 2 RxD
4 GND 5 GND
6 RxD 3 TxD
8 DSR 4 DTR
7 DCD 4 DTR

 

9 pin D-SUB female connector layout
Разъем 9 pin D-SUB female
На распиновку Cyclades terminal server crossover cable есть 1 отзыв(а): 0 положительных и 0 отрицательных.

Эта распиновка
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.