Pinouts >  ИБП  >  APC pinouts
9 pin D-SUB male connector layout
Разъем 9 pin D-SUB male
at the UPS
Should work with APC UPSs that use the following cables: APC Part# 940-0024C, # 940-0024D or 940-1524(black cable) This is to plug a Cisco console (rollover) cable into.
Для этой распиновки есть 27 совместимых устройств. Показать>

 

UPS
Signal Name		 DB-9 Male
(UPS end)		 RJ45 Female
(Adapter end)		 Adapter
Signal Name
TX 2 3 Rx, Received Data
RX 1 6 Tx, Transmitted Data
Common 9 4 GND

Might be needed in some cases: pins 8,1 (RTS, CTS) shorted.

 

Terminal Set Up:

2400 baud

8 bit no parity

1 stop

no handshake

8 pin RJ45 (8P8C) female connector layout
Разъем 8 pin RJ45 (8P8C) female
at the Adapter
Статус распиновки: +5 -0
На распиновку APC Smart UPS cable Cisco console Adapter pinout есть 5 отзыв(а): 5 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings