Pinouts >  ИБП  >  APC pinouts
4 pin USB A plug connector layout
Разъем 4 pin USB A plug
at the computer side (A connector)
May be easily obtained in any computer shop. Compatible with Back-UPS LS (USB) BP500UC, BP700UC; Back-UPS Pro USB BP350UC, BP500UC, BP500CLR, BP700UC; Smart-UPS 3.6G(USB) SUA1000, SUA1500, SUA750XL, SUA1000XL; Smart-UPS 4.5G(USB) SMT750, SMT100, SMT1500, SMT2200, SMT3000; Smart-UPS 5G(USB) SMX750, SMX1000, SMX1500 and some others
Для этой распиновки есть 18 совместимых устройств. Показать>
Pin
one side		 Signal Description Pin
other side
1 USB Vcc (Vbus) usually RED, wire should be 20-28 AWG 1
2 USB Data - usually WHITE, wire should be 28 AWG 2
3 USB Data + usually GREEN, wire should be 28 AWG 3
4 GND usually BLACK, wire should be 20-28 AWG 4

USB D+ and D- are twisted in cable. Outer shell is made of copper braid and aluminum shield.

Colors do not mean anything in the wiring scheme. You can use any color wire to rig something. Just make sure the colors match from end to end. Using the de-facto color is for industry types only.

 

4 pin USB B male connector layout
Разъем 4 pin USB B male
at the UPS side (B connector)
Статус распиновки: +1 -0
На распиновку APC UPSes with standard USB cable есть 2 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings