Pinouts >  UPS devices  >  Megatech pinouts
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the UPS
Used for connecting Megatech inteligent UPS (type I) or smart UPS (type II) to PC
The pinout should fit 2 devices/models. Click to list>
PC
Pin name		 PC
Pin		 Direction UPS
Pin		 UPS
Pin name		 Description
NC 1 1 NC  
AC Power Failuce 2 2 AC Power Failuce Active negative level (negative impulse indicates a power failure)
NC 3 3 NC  
Common Ground of Pin 2, 5, 6 4 <> 4 Common Ground of Pin 2, 5, 6  
UPS Battery Low 5 5 UPS Battery Low Active negative level (negative impulse indicates a batery low power level)
Turn Off UPS 6 6 Turn Off UPS Active positive level (positive impulse sent by PC shuts down the UPS)
NC / GND for pin 6 7 <> 7 NC / GND for pin 6 NC in Type I cable. GND for pin 6 in Type II cable.
NC 8 8 NC  
NC 9 9 NC  
 
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the PC
Pinout status: +0 -0
According to 1 reports in our database (0 positive and 0 negative) the Megatech M2501 UPS cables Types I, II pinout may be incorrect.

Is this pinout
NO DIY devices
Megatech M2501 UPS cables Types I, II visual pinout:click to enlarge
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings